Vector Cut File FAQs

Cut Files are vector based drawings which are used to give cutting direction to the digital plotters/cutters, laser, routing, embroidery machines etc.

If you sell vinyl skins for wrapping various devices then you need these Ai/CDR/SVG/PLT cutting files as a guide for your cutting machine.

We provide globally used vector file formats like Ai (Illustrator), CDR, EPS, DXF, PLT and SVG file formats which are supported by almost all the cutting machine softwares. In case you need any other file format, kindly contact us.

These vectors cut files are not restricted to the type of media. You can use them for cutting any type of vinyl or other media types, by considering the application of the media.

We have tried our best to make perfect vinyl-ready vector skin templates with the best quality and high precision. We run multiple tests and check on the original devices as well but due to diverse types of media and cutters, there might be very minute differences. So we recommend you to test them once before selling to your clients. In case there is a need for minor adjustments, we can do it at no extra cost. minute differences. So we recommend you to test them once before selling to your clients. In case there is a need for minor adjustments, we can do it at no extra cost.

Don’t worry about that; we have years of experience in digital design industry and expertise in graphic applications with keen desire of perfection. All our files have very less anchor points with no extra/stray points or open paths so as to ensure easy optimization with your machine.

Yes it will work as we provide Ai, CDR formats for Cut Files which are widely acceptable. You can import the file in your cutter software. Also, most of the cutters comes with plugins to use with Illustrator or CorelDraw.

You are expert of your work and these Cut Files are very easy to use. But we would want to mention few points, for startups, like;

• Use standard cutter/plotter from reputed companies like Graphtec, Rolland, Silhouette Cameo 3 etc. for accuracy in cutting. Most of our clients use them.
• Use only superior quality vinyl like 3M, Oracal because very thin or more sticky media is very difficult to apply accurately on the device due to small shapes.
• Take extra care while placing/moving CutFile over the design or while making print file, because sometimes it gets squeezed/resized without noticing and in such case, your skin will not fit onto the device.

Yes, we definitely make Cut Files on demand as per the availability of that device in our region.

Yes, we can customize it for you at very nominal fee.

Yes, as we are a dedicated team of graphic designers, we also make creative graphics including several cut ready designs. Please see our Cut Designs section.